I’m loving my camera and have been taking some pretty cool photos. For some reason though, the edges of every picture are being rounded by the shutter. I have made sure it was locked into the notch correctly, it’s just catching the edges of the circle (no it’s not on the oval setting). Any ideas on correcting this?
top of page
bottom of page
I do a lot of experiments on the Pinsta, and it's not something I've had happen to me. If it's not the pinhole shutter on the front, which you ruled out (insert top left of mine as a comparison, ignore the yellow ring, that's just me colour coding my pinhole sizes), then I'm thinking that the pinhole holder inside is not fully inserted, creating an obstruction.
You can check that by opening the holder (main images and bottom left) by twisting it anticlockwise, about 30-40 degrees and lifting it out. You might need to get your finger nail underneath it. The holder should be pushed all the way in, so that there is no gap between the body and the holder.
If you want to check/remove the pinhole, after you removed the holder, close everything up/put the back on, and push the pinhole out from the front with something soft - a piece of rolled up tissue etc. That way you know the pinhole is still inside the body and not dropped out, and then spend ten minutes looking for it (don't ask me how I know that). It will probably be stuck on one on the magnets when you reopen the case.
Are you preflashing?